2 CAN FD to PCle Interface – TP1013

SKU : TP1013

TP1013 is a 2-way CAN FD bus to PCIe interface equipment; can be easily competent for CAN FD / CAN network development, simulation, testing and other work.

UserManual

English version

Datasheet

English version

TP1013 Interface card can make the computer with PCIe slot to easily connect to the CAN / CAN FD bus network, real-time monitoring of multiple bus network, small size, can be easily embedded in the vehicle industrial control machine, single board machine (SBC), portable industrial control host, industrial notebook. Easy to install and easy to use.

With the powerful TSMaster software, it can easily monitor, analyze, simulate CAN FD bus data, and can also support UDS diagnosis, ECU brush, CCP / XCP calibration and other functions.

The secondary development API can support all kinds of development environments, such as C + +, C #, LabView, Python, etc., easy to integrate into various test systems, efficient and easy to use.

  • us (microsecond) level hardware message timestamp to meet higher order requirements.
  • Standard PCIe x1 interface, Windows, Linux system drive-free design, with excellent system compatibility.
  • Number of channels: dual channels with isolated CAN FD interface, provide the standard DB-9 connector through the interface board.
  • CAN channel DC2500V sequestration.
  • Automotive grade design, support dbc file, a2l file, blf file, asc file.
  • CAN channel port rate 125 Kbps- -1Mbps tunable.
  • Support for blf, asc format data recording and offline / online playback.
  • The UDS diagnosis and CCP calibration can be supported.
  • Support for the UDS-based Flash Bootloader.
  • Support for Windows, Linux system secondary development interface.
  • Built-in 120 euro terminal resistance can be used in software configuration.
  • Loadable TSMaster all charge license.
TP1013 pin img
Note: Pin PIN 2 is low CAN, and pin PIN 7 is high CAN, which is consistent with the international standard.
  • Vehicle multi-channel CAN FD / CAN bus data acquisition
  • Domain Controller Test
  • Various automated test systems
channel

2 * CAN FD

PC terminal interface

Standard PCIe interface

CAN terminal interface

DB9

drive

Windows, Linux system free drive free design, with excellent system compatibility

cache

Hardware cache, each channel sends buffer support to 1000 frames CAN / CANFD

CAN

Support CAN2.0A, B protocol, comply with ISO11898-1 specification, port rate 125 Kbps- -1Mbps

CAN FD

Support for ISO and non-ISO standard CAN FD, port rate 125 Kbps–8Mbps

Time stamp accuracy

1us, the hardware message timestamp, to meet the high-order requirements

terminal resistance

Built-in 120 euro terminal resistance can be used in software configuration

Send a message per second *

Maximum of 20,000 frames / s

Receipt of message messages per second *

Maximum of 20,000 frames / s

*

Single-channel 1Mbps, 0-byte data domain case

insulate

CAN channel DC 2500V isolation, electrostatic grade contact discharge ±8KV

material quality

plastics

working temperature

-40℃~80℃

Working humidity

10% ~ 90% (no condensation)

work environment

Stay away from the corrosive gases

Scroll to Top
Apply for TSMaster Trial

Tosun offers a free, no-commitment 30-day trial of TSMaster. Complete the form below to get your free software download link!