100Base-TI Media Converter – TE1001
SKU : TE1001
TE1001 is a point-to-point converter tool from 100Base-T1 Automotive Ethernet to 100Base-TX ordinary Ethernet. We provide matching cable with D-SUB9 Automotive Ethernet interface and RJ-45 crystal head interface, which is convenient to connect ECU to PC with Automotive Ethernet interface.
Datasheet
English version
UserManual
English version
Related Products
Related products
TE1001 Functions and parameters
TE1001 can select Master or Slave mode by pressing the button, and the Ethernet data will be nondestructive converted between Automotive Ethernet and 100Base-TX Ethernet communication.
TE1001 will be the ideal, low-cost converter tool between 100Base-T1 Automotive Ethernet and PC systems.
Suitable for R&D, ECU production line, test engineers.
- 100Base-T1 100Mbit/s full duplex 2 twisted pair UTP (Unshielded Twisted-pair)
- Automotive Ethernet – 100Base-TX ordinary Ethernet data conversion.
- Master/Slave mode can be configured by key, and display by LED status .
- The power supply voltage:DC 9~36V.
- Rugged aluminum housing design.
- Ethernet data communication status LED indicator.
- Customized high quality cable:
D-SUB9 Automotive Ethernet 100Base-T1 interface
RJ-45 standard Ethernet interface. - External size:97 x 79 x 43 mm.
Typical applications
- PC software customization
- Device communication interface integration
- BootLoader custom
- CCP/XCP protocol customization
- Diagnostic protocol customization
- Function customization
- Production line integration
Caution! Avoid Short Circuits
Before using the equipment, carefully review the pin information in the product user manual.
During operation, make sure to correctly connect the power lines and avoid frequent plugging and unplugging.
During operation, make sure to correctly connect the power lines and avoid frequent plugging and unplugging.
Caution! Damage from Electrostatic Discharge (ESD)
Beware! Electrostatic discharge (ESD) can potentially damage or destroy components on the card. Take preventive measures to avoid ESD and protect the components.