TC1013 – 2 CAN FD to USB interface
The TC1013 is a portable and easy-to-integrate dual channel CAN FD–to–USB interface device, supporting data rates up to 8Mbps. It connects to a PC via a high-speed USB 2.0 interface, and its driver-free design for Windows ensures excellent system compatibility.
- ARM64 Linux: tsdev
- HarmonyOS: tsdev
Related Products
Related products
TC1013 Functions and parameters
When used together with the powerful TSMaster software, the device supports loading DBC and ARXML database files, enabling convenient monitoring, analysis, and simulation of CAN FD bus traffic. It also supports UDS diagnostics, ECU flashing, and CCP/XCP calibration.
Cross-platform secondary development APIs are provided for both Windows and Linux, supporting a wide range of development environments including C++, C#, LabVIEW, Python, and more, making it easy to integrate into various automated test systems with high efficiency.
- Hardware message timestamping at the microsecond (μs) level, meeting advanced requirements
- Portable design with uniquely designed mounting holes,facilitating integration into various devices or instrument panels
- High-speed USB 2.0 interface with driverless compatibility for Windows and Linux systems, ensuring system compatibility
- CAN channel isolation up to DC2500V
- Automotive-grade design supporting dbc, a2l, blf, and asc file formats
- Adjustable CAN bus baud rates from 125Kbps to 8Mbps
- Support for recording data in blf and asc formats, enabling offline/online playback
- Supports UDS diagnostics and CCP/XCP calibration
- Support for UDS-based Flash Bootloader
- Secondary development interfaces for Windows and Linux systems
- Built-in 120-ohm terminal resistor,software configurable
- Ability to load all paid licenses for TSMaster
- PIN 2 CAN FD 1_Low
- PIN 3 CAN FD_GND
- PIN 4 CAN FD 2_Low
- PIN 5 CAN FD_Shield
- PIN 7 CAN FD 1_High
- PIN 8 CAN FD 2_High
Typical applications
- Vehicle multi-channel CAN FD / CAN bus data acquisition
- Domain Controller Test
- Various automated test systems
Specification
| Channel | 2 x CAN FD |
|---|---|
| PC Interface | High-speed of USB 2.0 |
| CAN Interface | DB9 |
| Driver | Driver-free design for Windows and Linux systems, ensuring system compatibility |
| Buffer | Each channel supports a transmit buffer of up to 1000 CAN frames |
| CAN | Supports CAN 2.0 A and B protocols, compliant with the ISO 11898 1 standard, with baud rates from 125 Kbps to 1 Mbps |
| CAN FD | Supports CAN FD that complies with both ISO and non ISO standards, with baud rates from 125 Kbps to 8 Mbps |
| Timestamp Precision | 1 µs, hardware message timestamp |
| Terminal Resistor | Built in 120 ohm terminal resistor, software configurable |
| Tx Frame Rate* | 20,000 frames/s |
| Rx Frame Rate* | 20,000 frames/s |
| * | Measured under single-channel operation at 1 Mbps with a 0-byte data field. |
| Isolation | 2500VDC galvanic isolation on CAN channels; ±8kV ESD (contact discharge) |
| Power Supply | USB power supply |
| Enclosure Material | Plastic |
| Weight | Approx. 108 g (without packaging)/Approx. 325 g (with packaging) |
| Operating Temperature | -40°C ~ 80°C |
| Operating Humidity | 10% ~ 90% (non-condensing) |
| Operating Environment | Keep away from corrosive gases |
During operation, make sure to correctly connect the power lines and avoid frequent plugging and unplugging.
