TC1052 – CAN FD/10Base-T1S to USB interface
The TC1052 is a communication tool from TOSUN 1 channel 10BASE-T1S and 2 channel CAN FD-to-USB interfaces. It allows raw 10 BASE-T1S or CAN FD frames to be transmitted to a PC via USB, and PC-originated frames to be sent back to the 10 BASE-T1S or CAN FD networks.
- ARM64 Linux: tsdev
- HarmonyOS: tsdev
Related Products
Related products
TC1052 Functions and parameters
Used with TSMaster, the TC1052 supports Ethernet data monitoring, simulation, analysis, and testing, including DoIP and SOME/IP protocol functions.
In addition to 10 BASE-T1S, the TC1052 provides two CAN FD channels (up to 8 Mbps), supporting DBC and ARXML databases for convenient monitoring, analysis, and simulation. It also supports UDS diagnostics, ECU flashing, and CCP/XCP calibration.
The TC1052 connects to the PC via USB and requires no external power, offering simple and convenient operation.
- μs-level hardware timestamps provide accurate timing for advanced simulation and diagnostics
- Driver-free USB 2.0 design; fully compatible with Windows/Linux
- CAN channels feature DC2500V isolation and automotive-grade robustness
- Software-configurable 120 Ω CAN termination; 100 Ω T1S termination; supports software-set node ID, node count, and timeout parameters for easy T1S network setup
CAN FD 1/2
- Pin 2 CAN FD 1_Low
- Pin 3 CAN FD_GND
- Pin 4 CAN FD 2_Low
- Pin 5 CAN FD_Shield
- Pin 7 CAN FD 1_High
- Pin 8 CAN FD 2_High
10 Base_T1S
- Pin 2 T1S_MDIN
- Pin 7 T1S_MDIP
Typical applications
- CAN FD/10Base-T1S synchronized acquisition
- Domain controller testing & diagnostics
- Support automated test and durability systems
- Vehicle diagnostics, ECU calibration, and flashing
Specification
| PC Interface | USB 2.0 |
|---|---|
| Timestamp Accuracy | 1 μs hardware message timestamp |
| Driver | Cross-platform driver-free design |
| Interface PIN | Standard D-Sub, 9-pin |
| License | Compatible with all TSMaster paid license modules |
| Power Supply | USB power supply |
| Power Consumption | 2 W |
| ESD Protection Level | Contact Discharge: 8 kV, Air Discharge: 15 kV |
| Case Material | Metal |
| Dimension | Approx. 113 x 98 x 38 mm |
| Weight | Approx. 237 g |
| Operating Temperature | -40°C ~ 80°C |
| Operating Humidity | 10% ~ 90% (non-condensing) |
During operation, make sure to correctly connect the power lines and avoid frequent plugging and unplugging.
