TC1043 – 2 Channel CAN/CAN FD/CAN XL Interface
The TC1043 is a 2-channel CAN/CAN FD/CAN XL interface tool for automotive electronic system development and validation, supporting data rates of up to 1 Mbps (CAN), 8 Mbps (CAN FD), and 20 Mbps (CAN XL FAST mode). It connects via USB 3.0 or RJ45 Ethernet and features a driver-free design for Windows and Linux.
Related Products
Related products
TC1043 Functions and parameters
The TC1043 is a 2 channel CAN bus simulation and testing tool for automotive electronic system development and validation. It features two CAN channels and supports CAN, CAN FD, and CAN XL protocols at data rates of up to 1 Mbps, 8 Mbps, and 20 Mbps, respectively, including CAN XL FAST mode.
Configurable sampling points and multiple operating modes, including loopback, listen-only, and restricted operation modes, are supported. With TSMaster software, the TC1043 enables efficient message transmission, reception, logging, and analysis.
Included Resources:
- TSMaster host software
- Cross-platform secondary development library (with a dedicated programming manual)
- Microsecond-level hardware timestamps for simulation and diagnostics
- USB 3.0 and RJ45 Ethernet interfaces support high-speed data transfer and flexible remote deployment
- Driver-free operation on Windows and Linux for plug-and-play use
- USB or DC 9–26V power supply options (12V recommended) support flexible deployment in laboratory and vehicle environments
- ESD protection up to ±4 kV contact discharge and ±8 kV air discharge, with ±2 kV EFT protection, compliant with IEC 61000-4-2 and IEC 61000-4-4
- Software-configurable CAN termination via latching relay for flexible control of termination resistance
Typical applications
- CAN / CAN FD / CAN XL network simulation and testing
- ECU testing, diagnostics, and validation
- CAN bus data logging and analysis
- Support CAN XL FAST mode
Specification
| Channel | 2 × CAN/CAN FD/CAN XL |
|---|---|
| PC Interface | Type-C USB 3.0 or RJ45 Ethernet |
| Driver | Cross-platform, driver-free design |
| Connector | Standard D-Sub, 9-pin |
| License | Supports all TSMaster paid licenses |
| Power Supply | USB-powered or external DC 9~26 V (12 V recommended) |
| Power Consumption | 4.2 W |
| ESD Protection | ±4 kV contact discharge, ±8 kV air charge |
| Enclosure Material | Metal |
| Dimensions | Approx. 113 × 98 × 38 mm |
| Weight | Approx. 265 g |
| Operating Temperature | -40℃ ~ 80℃ |
| Operating Humidity | 10% ~ 90% RH (no condensing) |
| Connection Standard | High-speed CAN (ISO 11898-2:2024 compliant) |
| Supported Protocols | CAN / CAN FD / CAN XL |
| CAN Baud Rate | 125 kbps ~ 1 Mbps |
| CAN Frame Data Length | 0 ~ 8 bytes |
| CAN FD Baud Rate | 125 kbps ~ 8 Mbps |
| CAN FD Frame Data Length | 0 ~ 64 bytes |
| CAN XL Bit Rate | Up to 20 Mbps (FAST mode) |
| CAN XL Data Length | 1 ~ 2048 bytes |
| Termination Resistor | Built-in 120 Ω, software configurable |
| Relay Type | Latching relay |
During operation, make sure to correctly connect the power lines and avoid frequent plugging and unplugging.
